Accomplice Mag Carrier 2.0
This product is currently out of stock.
Accessories
Description
When every round counts, having an extra magazine can make all the difference in a life-threatening situation. With CrossBreed's Accomplice 2.0 ambidextrous mag carrier, you'll have a premium solution that accompanies your holster which adheres to the highest standards of quality and functionality. Whether you prefer inside-the-waistband (IWB) or outside-the-waistband (OWB) carry for your magazine, The Accomplice 2.0 has you covered. Featuring a retention adjustment device inspired by our renowned Reckoning Holster, The Accomplice 2.0 allows you to fine-tune retention for your magazine to your exact preference. Left-handed shooters are not forgotten either – the ambidextrous design lets you switch the clip to either side with ease. With The Accomplice, you're always prepared for whatever comes your way.
| 9mm / .40 / .357 Sig - Double Stack |
Such As: FN - 509 Glock - 17/19/22/23/26/27/34/35 Sig Sauer - P365 S&W - M&P 9mm/.40 /.357 Sig Springfield - XD, XDM 9mm/.40 Taurus - G2, G2C |
|
9mm / .380 ACP - Single Stack
|
Such As: Kimber - Micro 9 & Micro .380 Sig Sauer - P238 & P938 Springfield - 911 9mm & .380 ACP |
|
.45 ACP - Single Stack |
Such As: 1911 Springfield - XDs 4.0 (Single Stack 9mm & .45ACP) Note: Will Not Fit The S&W Shield .45 |
|
.45 ACP - Double Stack |
Such As: Glock - 21 H&K- 45 |
|
Staggered 9mm |
Such As: Glock - 42, 43 S&W - Shield 9mm/.40S&W, Shield EZ 9mm/.380ACP |
Other Top Rated Products
- Reviews
- Questions
-
Oct. 9, 2023
C Cameron D. Verified BuyerGreat for my beretta APX
Great for my beretta APX A1 carry mags, very easy to adjust and I like the metal clip.
Other Firearms
Glock 19
Was this review helpful? -
June 21, 2023
C Chris G. Verified BuyerModifying the clip system.
Excellent customer service. I think we have everything worked out. The new clips solved the rocking (canting) problem and I think that a couple of drops of blur Locktite on the screws will solve the problem of them becoming loose after a few days use.
Other Firearms
Many. I’m an instructor. I’d add photos, but I don’t see a link to do so.
Was this review helpful? -
Dec. 31, 2020
S Stephen S. Verified BuyerYou can actually mount 2
You can actually mount 2 Accomplice Mag Carriers on 1 Quick-Lok System by setting up the carriers with the retention adjusters outward and using the outboard holes of the clip. There is about an inch of vertical adjustment so you can set it up as high or low as you want.
Was this review helpful? -
Sept. 29, 2023
D Dennis J. Verified BuyerGood but not perfect.
Good magazine carrier. The only thing I don't like is that it comes off the belt sometimes when you try to take magazine out. I swapped the clips out for an ulticlip and with those clips it's a huge improvement. Crossbreed should just use these Ulticlips and then the mag carrier would be 100% perfect. Included a picture with the upgraded clip.
Was this review helpful? -
Nov. 16, 2019
J Jeffrey S. Verified BuyerTook a while to do it “My Way”, but now it’s just right.
I purchased the Accomplice Mag Carrier to be used with the Reckoning Holster I purchased. I like to carry concealed but prefer to wear my equipment outside the waistband. The Accomplice Mag Carrier comes from Crossbreed ready for use inside the waistband. The instructions for converting the Mag Carrier to outside the waistband were not helpful as they pertained to the Reckoning Holster. Look at the pictures on the website and my side photo to see how to attach the speed clip (just one). Surprisingly the accomplice mag carrier stays in place on my belt and carried a fifteen round Glock 19 magazine very well (after adjustment - not to loose not to tight). Crossbreed’s Customer Service worked with me to help me get it just right. I compliment them on their product knowledge and professionalism.
Other Firearms
I have a few
Was this review helpful?
-
Sept. 25, 2024
S SamIf I want it with the back leather back, am I still gonna be able to switch between OWB and IWB?
-
Store Owner
Yes, it can be used OWB and IWB.
Was this answer helpful?
-
-
Aug. 13, 2023
M Mike w.Does it matter what direction the magazine slides down on the retention Device
-
Store Owner
No it doesn't. Face the magazines which ever way is best for your reloads.
Was this answer helpful?
-
-
July 29, 2023
K KevinDoes this work with a 32acp single stack magazine. Such as a magazine for the KelTec p32?
-
Store Owner
Hello, Our single 9 Accomplice will fit that. Unfortunately you cannot order it for that specifically. But you can order it for a Kimber Micro 9mm and that will get you the same Accomplice mag carrier.
Was this answer helpful?
-
-
Oct. 19, 2022
C Caleb2 questions. I have the shield arms S15 mags for the Glock 43/48. Which holder would I need?
Can you tuck your shirt in with this carrier?
-
Store Owner
Any Glock 43X/48 Magazine will work with our Accomplice Mag Carrier, just select your firearm and you will good to go. The Accomplice can be worn IWB or OWB and is Tuckable
Was this answer helpful?
-
-
Sept. 20, 2022
B BrianCan I order 2 of the OWB speed clips? I ordered one of the accomplice mag holders before but I prefer the OWB option better.
-
Store Owner
You would need to place the order for the OWB Wings and give us a call. We would then add a note to that order to send you the Speed Clip since we do not offer that on our website.
Was this answer helpful?
-